|
|
|
|
Please check the list of our
A digital angle setup system designed to be used on all types of JUMBO DRILL drills.
A large digital screen displays the drill string position in all three planes of rotation.
Field zero off-set function
Programmable pre-set positioning values
LED target bar for fine adjustment positioning.
Analog and digital output for PLC integration.
Data logging output.
The installation is simple and it can be done by
local maintenance crew.
 |
Large visible display unit is
portable and easy to install to any cab configuration. Bright numerals combined with LED target light bars are very visible and simple to understand. Operator uses soft-touch panel switches to access and use many useful features.
|
||||
 |
Vertical alignment is important
to maintain when ramp developments are required.
System measures and displays the actual feed table inclination in reference to the earth gravity center. Terrain level and machine horizontal position are not relevant if this system is used. |
||||
 |
Our unique design provides full
feed-table tilt coverage even in cases where power-dump or roll-over
functions are used. Simple to install even on retrofit applications.
|
|
|||
 |
Horizontal alignment is
important for almost all modern tunnelling blast-patterns. Our horizontal plane alignment sensors measure and calculate the angular position of the feed table relevant to the central axis of the drill frame. Most jumbo drill designs require only two horizontal plane sensors. |
||||
 |
Small and low profile sensor could be
installed on the top or on the bottom of the boom joint. Some minor design adjustments could be required to accommodate the installation. |
||||
| For Preview of Owner's Manual Quick Reference guide please click here. | |||||
Click here for END-USER AND OEM WARRANTY TERMS
DRAGAN TECHNOLOGIES INC. , 1477 Wellington Avenue, Winnipeg, MB, R3E 0K4, Canada, Tel: 1-204-775-2445
© Copyright Dragan Technologies Inc. 2007. All rights reserved. Contact: dti@mts.net